New Industrial Metal Manual Dry Epoxy Small Electrostatic Powder Coating Paint Spray Gun for Wheels (colo-800DT-06C)

Basic Info

Model NO.	colo-800DT-06C
After-sales Service	Online
Warranty	12 Months
Type	Electrostatic Spraying Equipment
Application	Hardware Spraying Equipment
Coating	Powder
Certification	CE, ISO
Method Type	Manual
Condition	New
Powder Coating System	Manual and Portable
Suitable	for Powder Coating Producer or DIY Coating Job
Useful Capacity	150 Ml (Approx. 90 G of Powder)
Powder Output	30 - 400 G/Min
Air Consumption (Application Range	1, 8 - 4 Nm3/H
Weight Without Connections	130 G
Powder Cup Hopper Diameter	66mm
Voltage	220V/110V/380V
Frequency	50-60Hz
Gun Weight	500g
Transport Package	Carton Packing, 10kgs Per Unit
Specification	CE
Trademark	COLO
Origin	China
HS Code	8424899990
Production Capacity	5000PCS/Year

Product Description

New Manual Electrostatic Powder Coating Spray Gun (colo-800DT-08C)

COLO-800DT-06C powder coating unit Provides unsurpassed operator control, coating efficiency and ease of use.
No matter what your application needs,HICOLO has the right powder coating solution for you!

Application cup for COLO-800D manual powder gun
The application cup is built exclusively for electrostatic coating with organicpowders. Any other use is considered as non-conform.
The application cup is especially suited for manual coating very small series,test coatings at powder manufacturers, and for laboratory tests.The powder types used are to be fluidized without vibration.
Typical characteristics- The application cup is especially suited for working with minimumquantity of powder- Precise application parameters lead to repeatable applicationperformances- The application cup enables a very quick color change- The application cup can be connected to an COLO coating unit colo-06 powder gun by quick release connection - no extra device necessary

Workpieces type	Output voltage	1ST air	2nd air	Painting distance
Big size new	80-100kv	4-6kg/cm2	2-3kg/cm2	15-20cm
Corner,sides	40-60kv	2-3kg/cm2	0.5-1 kg/cm2	10-15cm
repaint	20-30kv	2-3kg/cm2	0.5-1kg/cm2	15-20cm

 

Powder Coating gun pic :

 

Maintenance and cleaningNote:Regular and conscientious maintenance increases the operating lifeof the unit and ensures a longer, more constant coating quality1. Empty any powder out of the application cup2. Clean the gun and the outside of the application cup by blowingoff, wiping etc.3. Release the bayonet closure between cup cover and cup4. Clean the cup5. Pull out the dip tube and clean it6. Clean the cup with compressed air

Package:
Carton 42*41*37,8.4kgWe also supply other small cup or hopper power coating machine,Please contact Charlene for more information!